Page 8
View/Set Low Temperature Alarms
To set the Low Temperature Alarm value, press the t key for
ten seconds while viewing water temperature (until you hear a
long beep). Use the t and s keys to adjust the value. Press the
: key for 1/2 second to save the new value to memory.
View/Set High Temperature Alarms
To set the High Temperature Alarm value, press the s key for
ten seconds while viewing water temperature (until you hear a
long beep). Use the t and s keys to adjust the value. Press the
: key for 1/2 second to save the new value to memory.
Arming and Disarming the Temperature Alarms
To arm (enable) the low and high temperature alarms, press the
s key for one half second while viewing water temperature.
The alarm bell symbol will be displayed. If the tempreature
drops below the Low Temperature alarm value or increases
above the High Temperature alarm value (and the alarms are
armed), then the alarm buzzer will sound and the alarm bell will
flash.
To disarm (disable) the low and high temperature alarms, press
the t key for one half second while viewing water tempera-
ture. The alarm bell symbol will disappear.
To Next Page
Loading...