- 91 -
When there are other boats around you, your Fish finder could receive interference. The steps of the
function are from off to level 2. The bigger number, the more rejection.
(☞ the default setting is OFF.)
1.9. Noise Rejection
Your Fish finder could be disturbed by the engine noise. This function can reject the noise from the
engine or other machinery instruments.
(☞ the default setting is OFF.)
2. Advanced Menu
▶ [MENU] -> Advance
2.1. Display
2.1.1. A-scope
A-scope shows the research under the water by a scope to see the environment under the water.
(☞ the default setting is OFF.)
2.1.2. Image Speed:
Select the speed of Fish finder image from 4X until 1/32X.
(☞ the default setting is 1X.)
2.1.3. White Line
If it is necessary to see fish on the bottom. The color of the bottom changes into white or black to
make the bottom easier to see.
(☞ the default setting is OFF.)
2.1.4. Depth
Shown/Hidden the depth range on the screen.
(☞ the default setting is shown.)
2.1.5. Depth Font
Select the depth range font size on the screen.
(☞ the default setting is Large.)
2.1.6. TEMP
Show/Hide the temperature on the screen.
To Next Page
Loading...
