SIB Standalone Keypad Access Control User Manual

Standalone Keypad Access Control
User Manual

SIB Standalone Keypad Access Control Specifications

General

Brand	SIB
Model	Standalone Keypad Access Control
Category	Keypad
Language	English

Summary

Packing List

Quick Reference Programming Guide

To enter the programming mode

Describes how to access the programming mode using the master code.

To exit from the programming mode

Explains the procedure to exit the programming mode.

To change the master code

Details the steps to modify the master code for security.

To add a PIN user

Guides on adding new users via PIN entry for access.

To add a card user

Explains the process of registering card users for access control.

To delete a PIN or a card user

Outlines the procedure for removing existing PIN or card users.

To unlock the door for a PIN user

Describes how a PIN user can unlock the door.

Description

Features

Specifications

Installation

Wiring

To Reset to Factory Default

Anti Tamper Alarm

Sound and Light indication

Detailed Programming Guide

User Settings

Covers the configuration of user access credentials and modes.

To enter the programming mode

Explains the procedure to access the system's programming interface.

To exit from the programming mode

Details how to safely leave the programming mode.

To change the master code

Guides on modifying the master code for enhanced security.

Setting the working mode

Configures how users are authenticated (card, PIN, or both).

To add a Pin user

Step-by-step instructions for adding new users via their PIN.

To delete a PIN user

Instructions for removing a user's access using their PIN.

To change the PIN of a PIN user

Steps to update an existing user's PIN number.

To add a card user (Method 1)

Method for adding card users with auto-generated user IDs.

To add a card user (Method 2)

Alternative method for adding card users using user ID allocation.

To add a card user (Method 3)

Adding card users by inputting the card number directly.

To add a card user (Method 4)

Method for adding card users by linking user ID to card number.

To delete a card user by card number

Process for removing card users based on their card number.

To delete a card user by user ID

How to remove card users by their assigned user ID.

To add a card and PIN user

Adding users who require both card and PIN for access.

To change a PIN in card and PIN mode (Method 1)

Modifying a user's PIN outside of the main programming mode.

To change a PIN in card and PIN mode (Method 2)

Alternative method for changing a user's PIN.

To delete a Card and PIN user

Removing card and PIN users by deleting the associated card.

To add a card user in card mode

Adding users who only need a card for access.

To Add and Delete a card user

Combined process for adding and then deleting a card user.

To delete All users

Procedure for clearing all user data; use with caution.

To unlock the door

Instructions for unlocking the door for different user types.

Door Settings

Relay Output Delay Time

Configures the duration the door strike remains activated.

Door Open Detection

Settings for detecting prolonged door openings or forced entry.

Alarm output time

Sets the duration for the alarm output signal.

Keypad Lockout & Alarm Output options

Configures keypad lockout or alarm activation on invalid entries.

To remove the alarm

Procedures to clear specific alarm states.

To reset the Door Forced Open warning

Resets the warning for forced door openings.

To reset the Door Open Too Long warning

Resets the warning for doors left open too long.

The unit operating as a Wiegand Output Reader