8 DST2600 User’s Manual
On the front panel there is normally a thermo-magnetic breaker to command and protect the
engine warming resistor (if present).
In some version it can be substituted with a breaker on the device supply at battery voltage,
with the rule to disconnect the device when its use is not scheduled.
The upper part of the control panel is made of polycarbonate, resistant to oil and solvents,
which has symbols and identification strings.
Here there are all the commands, the alphanumerical signalling and the warning lights; these
will be described in details in the following paragraphs.
The frontal panel can be different in the graphical aspect with respect to the one shown here;
however the functions of the keys, the warning lights and of the display stay unchanged
To Next Page
Loading...
