DST4602 User’s Manual 3
INTRODUCTION
The manual must always be kept in a safe place where it is readily available for quick reference.
The manual should be read carefully, and every paragraph understood by the operators and
technicians doing routine and periodic maintenance.
If the manual is lost or damaged, ask the installer/manufacturer for a copy, quoting the model, code,
serial number and year of manufacture.
Many accidents are caused by poor knowledge and the non-observance of safety regulations, which
must be observed when operating and/or servicing the machine.
To prevent accidents, before using or servicing the machine you should read, understand and observe
the precautions and warnings in this manual.
The following words have been used to identify the safety messages in this manual.
WARNING! This word is used for safety messages in the manual when there are
potentially dangerous situations that could cause serious or mortal injury unless the
hazard is prevented.
These safety messages describe the usual precautions to take to avoid the dangerous
situation. Ignoring these precautions can cause serious damage to property and/or
injury to persons.
WARNING! This word is used in the safety messages for risks which, unless
avoided, can cause minor or moderate injuries or damage.
The message may also be used for hazards that can cause damage to property and/or
injury to persons.
INFORMATION! This term implies the message provides information useful for
performing the current operation, or explanations or clarifications for procedures.
To Next Page
Loading...
