Need help?Do you have a question about the Sices GC315 and is the answer not in the manual?
Provides critical safety precautions and warnings for device operation and maintenance.
Describes the 8 configurable digital inputs, their functions, and expansion possibilities.
Details the 8 digital relay outputs, their default functions, and configuration options.
Covers JM and JL analogue inputs, their configuration, and use as digital inputs.
Details the connection of mains voltage and frequency using the JH connector.
Explains the generator connection via the JG connector for voltage and frequency measurements.
Details the various communication ports for connecting the controller to PCs, networks, and modems.
Explains the CAN-BUS interface for engine ECU communication and expansion modules.
Details the hardware setup for Link controllers, including SIM card insertion and antenna connections.
Covers the configuration of GSM/GPRS, APN, and connection modes for data exchange.
Describes display features like backlight, contrast adjustment, and mode navigation.
Details the five device management modes (OFF/RESET, MAN, AUTO, TEST, REMOTE START).
Explains how the controller acquires and interprets mains status and parameters.
Covers generator voltage and frequency measurement and protection parameters.
Details how the controller determines engine status and handles engine commands.
General| Brand | Sices |
|---|---|
| Model | GC315 |
| Category | Controller |
| Language | English |
To Next Page
