Sices GC310 Use And Maintenance Manual

4
Use and maintenance Manual AUTOMATIC GENSET CONTROL PANEL with GC310/GC350
The product has been designed and manufactured in compliance with the safety regulations in force,
for use in normal and not classified environments.
In order to prevent damages and injuries to things and persons, we strictly recommend to use all
necessary caution and observe the regulations.
The Control Panel dimensions for the calculation of the wasting heat power have been estimated
considering that no other heating sources occur nearby.
If the Control Panel is placed into a room together with other panels, a suitable distance allowing the
wasting of the heating produced must be guaranteed.
The calculation has been carried out for a use at 35°C average environmental temperature
according to CEI EN 60439-1 and IEC 439-1rules.
In case it is necessary to use the equipment at a different average ambient
temperature, please contact our Engineer Department for the necessary evaluations.
The Control Panel must only be intended for the purpose to which it has been designed. Any other
use is considered improper and therefore dangerous.

Sices GC310 Specifications

General

Brand	Sices
Model	GC310
Category	Controller
Language	English