Figure 3: Mounting the two handles
3.3.4 Mounting the safety light curtain
General notes
b
Find a place to mount the safety light curtain that is stable enough to hold its
weight.
b
Mount the sender and receiver on a level surface.
b
Mount the sender and receiver at the same height.
b
The end with the connecting cable must point in the same direction for both devi‐
ces.
Figure 4: The sender and receiver are mounted incorrectly
MOUNTING
3
8017025/YIZ2/2015-02-25 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | C4000 Select Ex
13
To Next Page
Loading...