11 List of figures
1. Mounting the safety light curtain in the explosion-proof enclosure........................11
2. Aligning the safety light curtain in the explosion-proof enclosure...........................11
3. Mounting the two handles......................................................................................... 13
4. The sender and receiver are mounted incorrectly....................................................13
5. Mounting the safety light curtain without the alignment bracket........................... 14
6. Mounting the safety light curtain without the alignment bracket: Step 1.............. 14
7. Mounting the safety light curtain without the alignment bracket: Step 2.............. 15
8. Mounting the safety light curtain without the alignment bracket: Steps 3 and 4..15
9. Mounting the safety light curtain using the alignment brackets.............................16
10. Assembling the alignment brackets..........................................................................16
11. Mounting the safety light curtain using the alignment brackets: Steps 1 to 6...... 17
12. Mounting the safety light curtain using the alignment brackets: Step 7................17
13. Mounting the safety light curtain using the alignment brackets: Step 8................18
14. Mounting the safety light curtain using the alignment brackets: Steps 9 and 10.18
15. Mounting the safety light curtain using the alignment brackets: Steps 11 and 12
..................................................................................................................................... 19
16. Rotating with the alignment bracket......................................................................... 22
17. Dimensional drawing, sender and receiver, protective field height 600 mm.........27
18. Dimensional drawing, sender and receiver, protective field height 900 mm.........28
19. Dimensional drawing, sender and receiver, protective field height 1,200 mm..... 29
20. Dimensional drawing, swivel mount bracket (2074530)........................................ 32
21. Dimensional drawing, alignment bracket (2072525)..............................................32
LIST OF FIGURES 11
8017025/YIZ2/2015-02-25 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | C4000 Select Ex
35
To Next Page
Loading...