SICK C4000 Select Ex - Page 18

Figure 13: Mounting the safety light curtain using the alignment brackets: Step 8
9. Fix the upper end of the explosion-proof enclosure to the upper alignment bracket
using two M8 screws.
10. Tighten the two lower screws.
Figure 14: Mounting the safety light curtain using the alignment brackets: Steps 9 and 10
11. Turn the safety light curtains so that they face one another and so that the receiv‐
er receives the strongest signal possible.
3
MOUNTING
18
O P E R A T I N G I N S T R U C T I O N S | C4000 Select Ex 8017025/YIZ2/2015-02-25 | SICK
Subject to change without notice