SICK RFU62 Series - 2.2 Improper use

A
"Ethernet"
(Host 2)
"Ethernet"
(Aux 2)
"Ethernet"
Input 2 3
Input 1 4
Output 1 2
Output 2 1
RFU62x-
101xx
Connection
module
"Power/Serial Data/CAN/I/O"
(Aux 1, Host 1)
...
...
1
2
V
S
GND
HOST
V
S
EthernetEthernet
Cable å Cable ä
Reading result â
"Serial RS-232/RS-422/485" (Host 1) ã
á
5
6
USBUSB
"Serial RS-232" (Aux 1) 7
Cable 8
SOPAS ETSOPAS ET
PC
à
"USB" (Aux 3),
for temporary use only 9
Cable ß
Configuration
Diagnostics
Transponder
access
Reading result
Further data
processing
SerialSerial
1
Digital output 2, e.g. for connecting an LED
2
Digital output 1, e.g. for connecting an LED
3
Digital input 2, e.g. for connecting an incremental encoder
4
Digital input 1, e.g. for connecting a trigger sensor (read cycle)
5
Supply voltage V
S
6
CDB620, CDB650-204 or CDM420 connection module
7
Alternative to USB or Ethernet Aux port
8
Null modem cable (female connector, D-Sub, 9-pin / female connector, D-Sub, 9-pin), crossed TxD and RxD
9
USB, alternative to serial RS-232 or Ethernet Aux port. The USB interface is only for temporary use as a service interface.
ß
Adapter cable (male connector, USB, Micro-B type / male connector, USB, type A)
à
Configuration with SOPAS ET, prepared representation of the read result, transponder access or reading diagnostics
á
Further data processing
â
Read result
ã
Alternative to Ethernet host port
ä
Adapter cable (male connector, M12, 4-pin, D-coded / male connector, RJ-45, 8-pin)
å
For CDB620 and CDM420: Adapter cable (female connector, M12, 17-pin, A-coded / male connector, D-Sub-HD, 15-pin)
For CDB650-204: Connection cable 1:1 (female connector, M12, 17-pin, A-coded / male connector, M12, 17-pin, A-coded)
B
Configuration
Diagnostics
Transponder
access
Reading result
SOPAS ETSOPAS ET
PC
Cable ß
à
RFU62x-104xx
"Serial RS-232/RS-422/485" (Host 1)
Connection
module
"Power/Serial Data/CAN/I/O"
(Aux 1, Host 1)
...
...
1
2
V
S
GND
Reading result â
Input 2 3
Input 1 4
Output 1 2
Output 2 1
V
S
HOST
Further data
processing
á
5
6
SerialSerial
USBUSB
"Serial RS-232" (Aux 1) 7
Cable 8
"USB" (Aux 2),
for temporary use only 9
1
Digital output 2, e.g. for connecting an LED
2
Digital output 1, e.g. for connecting an LED
3
Digital input 2, e.g. for connecting an incremental encoder
4
Digital input 1, e.g. for connecting a read cycle sensor
5
Supply voltage V
S
6
Connection module CDB620 or CDM420
7
Serial RS-232, alternative to USB
8
Cable (female connector, D-Sub, 9-pin / female connector, D-Sub, 9-pin)
9
USB, alternative to Serial RS-232. The USB interface is only for temporary use as a service interface.
ß
Adapter cable (male connector, USB, Micro-B type / male connector, USB, type A)
à
Configuration with SOPAS ET, prepared representation of the read result, transponder access or reading diagnostics
á
Data further processing
â
Read result
8015928/10XW/2019-12-12/en RFU62x | SICK 10