What does it mean when the battery LED is blinking on my Siel SAFEPOWER S 30kVA as a battery low pre-warning?
When the Siel UPS provides a battery low pre-warning, the Battery LED will blink once per second.
What does it mean when my Siel UPS indicates a Bypass Site Wiring Fault?
If the Siel UPS detects a Bypass Site Wiring Fault, the Fault LED will blink once per second.
What does it mean when my Siel SAFEPOWER S 30kVA UPS indicates an abnormal mains frequency?
If the Siel UPS detects an abnormal mains frequency, the Battery LED will be lit once per 2 seconds.
What does it mean when the Fault LED is blinking once per 2 seconds on my Siel UPS?
If the Siel UPS experiences an internal communication error, the Fault LED will blink once per 2 seconds.
What does it mean when the INV LED is blinking once per 2 seconds on my parallel Siel SAFEPOWER S 30kVA UPS?
If the Siel UPS experiences a parallel overload, the INV LED will blink once per 2 seconds.
What does it mean if my Siel SAFEPOWER S 30kVA UPS Bypass is unable to trace?
If the Bypass is unable to trace, the BPS LED will be blinking.
What does it mean when my Siel SAFEPOWER S 30kVA shows a CAN communication fault?
If the Siel UPS experiences a CAN communication fault, the Fault LED will light twice per second.
Important safety instructions for operating the UPS.
Guidelines for proper UPS installation environment and conditions.
Requirements for external circuit breakers and protective devices.
Procedure for connecting power cables to the UPS terminals.
Instructions for connecting batteries to the UPS.
Procedures for turning the UPS on and off, including restart and shutdown.
General| Apparent Power | 30 kVA |
|---|---|
| Frequency | 50/60 Hz |
| Battery Type | Sealed lead-acid maintenance free |
| Battery Backup Time | Depending on configuration |
| Operating Temperature | 0°C to 40°C |
| Communication Interface | SNMP (Optional) |
| Humidity | 0% to 95% (non-condensing) |
To Next Page