Need help?Do you have a question about the Siel SAFEPOWER S and is the answer not in the manual?
General safety precautions and warnings.
Explains warning and caution symbols used in the manual.
Brief overview of the UPS capabilities and applications.
Details the key functions and features of the UPS system.
General installation guidelines.
Physical dimensions of the UPS unit.
Space requirements for operation and ventilation.
Procedures for unpacking and initial inspection.
Visual overview of the UPS cabinet's front and side views.
Connecting multiple UPS units for parallel operation.
How to connect control cables between UPS units.
Essential requirements for a parallel UPS system.
Describes various operating modes of the UPS.
Steps to restart the UPS system.
Steps for testing UPS functionality.
How to use the maintenance bypass switch.
Procedure for starting the UPS from a cold state.
Steps for safely shutting down the UPS.
Configuration steps for parallel UPS operation.
Setting the operating mode (ECO, NOR, PAL).
Adjusting the output voltage of the UPS.
Setting the output frequency of the UPS.
Configuring battery capacity for accurate monitoring.
Setting the number of batteries used.
Setting the upper limit for bypass voltage.
Setting the lower limit for bypass voltage.
Configuring buzzer alerts and mute options.
Enabling and configuring periodic battery self-tests.
Assigning unique IDs to UPS units in parallel.
Setting the number of UPS units in a parallel configuration.
Configuring redundancy for parallel UPS systems.
Technical specifications for the 10KVA model.
Technical specifications for the 15KVA model.
Technical specifications for the 20KVA model.
Technical specifications for the 30KVA model.
Technical specifications for the 40KVA model.
To Next Page
General
