Need help?Do you have a question about the Siel 6kVA and is the answer not in the manual?
General| Apparent Power | 6 kVA |
|---|---|
| Frequency | 50/60 Hz |
| Input Voltage | 230 VAC (single phase) |
| Output Voltage | 230 VAC (single phase) |
| Battery Type | Sealed Lead-Acid (SLA) |
| Battery Backup Time | Varies based on load |
| Operating Temperature | 0°C to 40°C |
| Humidity | 95% non-condensing |
| Dimensions | Varies by model |
| Weight | Varies by model |
Important safety precautions and warnings for operating the UPS.
Explanation of warning and caution symbols used within the manual.
Overview of the UPS series, its capacities, modularity, and applications.
Details on 1-Phase In/1-Phase Out, Digital Control, Battery Configuration, Intelligent Charging, and LCD Display.
Steps to check the UPS unit and accessories after unpacking for damage or missing parts.
Front view diagram of the UPS module with labeled components.
Identification of components on the UPS module's rear and side views, including ports and displays.
Guidelines for UPS placement, environmental conditions, and battery installation temperature.
Requirements for installing external circuit breakers for AC supply and battery protection.
Guidelines for selecting and connecting power cables, including cable dimensions.
Procedure for connecting power cables after positioning and securing the UPS.
Explanation of the UPS battery framework and connection details.
Instructions for installing multiple UPS units for parallel operation.
Instructions for connecting multiple UPS units for parallel system installation.
Details on interconnecting UPS modules using control cables in a ring configuration.
Requirements for parallel UPS systems to ensure equal utilization and reliability.
Explanation of the UPS's operational modes: Normal, Battery, Bypass, ECO, and Parallel redundancy.
Procedures for turning the UPS unit on and off.
Steps to connect the UPS to the utility power supply and initiate operation.
Procedure for starting the UPS when utility power is absent but batteries are normal.
Procedure for turning off the UPS inverter while maintaining bypass supply.
Steps to safely disconnect the UPS and load from the utility power.
Instructions for interpreting the UPS's LCD display interface and its main screens.
Explanation of how the UPS transfers between AC, battery, and bypass modes under various conditions.
Procedure for UPS transfer to bypass mode due to overload conditions.
How the UPS switches to battery mode when AC power fails.
How the UPS enters bypass mode due to high internal temperature.
UPS response to an output short circuit condition.
Reference to instructions for UPS monitoring software.
Guide to navigating the UPS's LCD operation menu for status and settings.
Priority of information display on the UPS LCD screen.
Defines the USB communication port pinout, application, and available functions for monitoring.
Lists optional modules such as Dry contact card, SNMP card, and Parallel card.
Table listing the operational status and mode indicators (LEDs and content displayed).
Table detailing UPS alarm warnings, buzz patterns, and corresponding LED indications.
To Next Page
