Read this information to avoid equipment damage
2᧪Main Features
2.1 Summarization
This series UPS is a kind of single phase in single phase out high frequency online
UPS, it provides two capacities: The 6kVA and 10kVA. The products are modularized and
adopt the N+X redundancy. It can flexibly increase the number of the UPS modules
according to the load capacity which is convenient for flexible allocation and gradually
investment.
The UPS can solve most of the power supply problems, such as blackout, over-voltage,
under-voltage, voltage sudden drop, oscillating of decreasing extent, high voltage pulse,
voltage fluctuation, surge, inrush current, harmonic distortion (THD), noise interference,
frequency fluctuation, etc..
This UPS can be applied to different applications from computer device, automatic
equipment, communication system to industry equipment.
2.2 Functions and Features
ٟ1Phase In/1Phase Out UPS
It is 1Phase In/1Phase Out high-density UPS system, of which input current is kept in
balance. No unbalance problem might occur. And also support for single phase input.
ٟDigital Control
This series UPS is controlled by Digital Signal Processor(DSP); ehance, it increases
reliability, performance, self-proteciton, self-diagnostics and so on.
ٟBattery Configurable from 16pcs to 20pcs
The battery voltage of this series UPS can be configured at 16pcs, 18pcs or 20pcs
according to your convenience.
ٟIntelligent Charging Method
The series UPS adopts advanced three-stage charging method—
1
st
stage: high current constant current charging
to guarantee to charge back to 90%;
2
nd
-stage: Constant Voltage
In order to vitalize battery and make sure batteries are fully charged
3
rd
stage: floating mode.
With this 3-stage charging method, it extends the life of the batteries and guarantees fast
charging.
ٟ
LCD Display
With LCD plus LED displays, the user may easily get UPS status and its operational
parameters, such as input/output voltage, frequency & load%, battery % and ambient
To Next Page
Loading...
