6) Select and confirm the status info can view the details, including status information,
alarm information, code, power rating and version. See Fig 13 to 14
Fig.13᧶main menu Fig.14᧶main menu
7) Select and confirm setting menu, setting information will be displayed on the screen,
which includes user set, system set, parallel set, battery sett, revise set. See Fig 15 to 19
Fig.15᧶setting menu Fig.16᧶setting menu
Fig.17᧶setting menu Fig.18᧶setting menu
Fig.19᧶Parallel setting
4.4 Working Mode and transferring
Usually, the UPS should be set to work in AC mode, so it will transfer to battery mode
automatically without interruption when AC fails. When the UPS is overloaded, it will transfer
to bypass mode without interruption. When the inverter is defective or over temperature
occurred inside the UPS, the UPS will transfer to bypass mode if the bypass is normal.
To Next Page
Loading...
