s
Product documentation 1D 3.8.en Rev. E, 10/13 page 3/42
Rev. Revised items Date Name
A 4.2.6 Fill the bearings with oil, oil cleanliness 22.02.13 Vesely
B
3.2.5
Anticorrosion treatment of machined parts and bearings
3.2
Storage conditions
07.03.13 Pochop
C
4.2.9
Alignment (rolling bearings)
4.2.10
Alignment (slide bearings)
14.03.13 Pochop
D
4.2.12
Checking the insulation resistance of stator winding
4.2.13
Insulation test for stator winding
4.2.14
Drying
4.4.1
Installation
05.09.13 Vesely
E
3.3
Storage with shaft in horizontal position
3.4
Putting into operation after storage period
3.5
Sealed packings
3.6
Inspection intervals during storage
3.7
Control check during storage
07.10.13 Pochop
To Next Page
Loading...
