s
Product documentation 1D 3.8.en Rev. E, 10/13 page 9/42
to the loss of lucidity. Therefore operational instructions designed for qualified operators (see above
mentioned) contain such recommendations that are necessary if a machine is used in accordance with
provisions in the extent of industrial operation.
If there are special requirements concerning nonindustrial area (e.g. protection against dangerous
touch of children fingers and so on), these conditions have to be secured on the device by means of
supplementary protective provisions.
If there are any discrepancies, especially missing information which specify a product, sales department of
SIEMENS is in charge of providing necessary explanation. Concerning this matter we ask you to mention
mainly type and production number of a machine, please.
Concerning planning, assembly, launching and service we recommend using the promotion and
services of appropriate service centre of SIEMENS.
RECOMMENDATIONS: Other detailed information concerning general works e.g. checking of delivered coils
(damages which can be caused during transport), long term storage and preserving of machines, checking of
footing, connection stretching, erection (setting) and (seating), levelling of a machine and others could be
found in our “Assembly materials” or (newly) in “Operational instructions”. These materials could be obtained
in SIEMENS sales department.
To Next Page
Loading...
Need help?
General
