Siemens 2 Series User Manual

9001643475 (020401) SMV2HAX02G *9001643475*
Quick reference guide Dishwasher
en
Before using for the first time, read the instruction manual and the safety information it contains.
Setting up Home Connect
Tip:Connect your appliance to a mobile device. You can con-
veniently change all settings using the HomeConnect app.
1.
Install the HomeConnect app on your mo-
bile device and follow the instructions.
2.
Scan the QR code with the HomeConnect
app.
Overview of water hardness settings
You can find an overview of the water hardness values that can be
selected here.
A table of country-specific units can be found in the instruction
manual.
Hardness
range
mmol/l Level LED A LED B LED C
Soft 0 - 1.1 0
Medium 1.2 - 2.9 1
Hard 3.0 - 3.7 2
Hard 3.8 - 6.2 3
Setting the water softening sys-
tem
1.
Press ⁠.
2.
To open the appliance settings,
press for 3 seconds.
a is flashing on the display.
3.
Press repeatedly until the right
water hardness has been set.
0, 1, 2 or 3 LEDs will light up ac-
cordingly.
4.
To save the settings, press
for 3 seconds.
Adding special salt
To avoid damage to the appliance, only add special
salt to the dispenser for special salt just before the
programme starts.
1.
Unscrew the lid of the dispenser for special salt
and remove.
2.
On initial start-up: Fill the dispenser right up with
water.
3.
Add the special salt to the
dispenser. The water in the
dispenser is displaced and
forced out. Never add de-
tergent.
4.
Place the lid back on the dispenser and turn to
close.
Adding rinse aid
1.
Press the catch on the lid
of the dispenser for rinse
aid and lift ⁠.
1
2
2.
Add rinse aid up to the
max mark.
max
3.
Close the lid of the dispenser for rinse aid.
a The lid clicks into position.
How to use your appliance
1.
Load the tableware.
Only clean tableware that is suitable for dish-
washers. Remove large remnants of food from
the tableware. Check that the spray arms can ro-
tate freely.
2.
Add detergent.
3.
Switch on the appliance ⁠.
4.
Select the programme.
5.
Start the programme ⁠.
6.
Remove the tableware at the end of the pro-
gramme.
7.
To cancel the programme, press for
approx. 4seconds.
The programme is cancelled and ends after ap-
prox. 1minute.
Programmes
The programme data has been meas-
ured in the laboratory according to
European standard EN60436.
The consumption figures depend on
the programme and additional func-
tion selected.
The runtime will change if the rinse
aid system is switched off or rinse aid
needs to be added.
Programme 1) Duration [h:min]
2) Energy [kWh]
3) Water [l]
Intensive 70°
1) 2:05 -2:15
2) 1,300 -1,400
3) 11,5 -14,0
Auto 45-65°
1) 1:40-2:45
2) 0,900-1,500
3) 7,0-15,5
Eco 50°
1) 4:55
2) 0,836
3) 9,5
Express 65° - 1h
1) 1:00
2) 1,300
3) 10,5
Machine Care
1) 2:10
2) 1,350
3) 15,2
Favourite
1) 0:15-0:15
2) 0,050-0,050
3) 4,0-4,0
Adding detergent
1.
Add the detergent to the
dry detergent dispenser.
15 ml
25 ml
50 ml
2.
Close the lid of the deter-
gent dispenser.
a The lid clicks into position.

Siemens 2 Series Specifications

General

Energy Efficiency Class	A+++
Noise Level	44 dB
Number of Programs	6
Drying Class	A
Child Lock	Yes
Special Features	AquaSensor
Delay Start	Yes

Summary

Setting Up Home Connect

Home Connect App Installation and Setup

Instructions for installing the Home Connect app and connecting your appliance to a mobile device.

Water Hardness Settings

Setting the Water Softening System

Guide to adjusting the water softening system settings using the appliance's control panel.

Adding Dishwasher Consumables

Adding Special Salt

Instructions for adding special salt to the dispenser to prevent appliance damage, especially on initial start-up.

Adding Rinse Aid

Procedure for filling the rinse aid dispenser up to the maximum mark.

Adding Detergent

How to add detergent to the dry detergent dispenser and close the lid.

How to Use Your Appliance

Operating the Dishwasher

Step-by-step guide for loading, selecting programmes, starting, and cancelling the dishwasher.

Dishwasher Maintenance and Cleaning

Cleaning Filters

Procedure for checking and cleaning the coarse and micro filters after each wash cycle.

Cleaning Spray Arms

Instructions for removing, cleaning the nozzles, and reassembling the upper and lower spray arms.

Cleaning Wastewater Pump

Steps to safely clean the wastewater pump, including removing foreign bodies and re-securing the cover.

Troubleshooting Common Dishwasher Issues

Water Supply Faults

Diagnosing and resolving issues indicated by the water supply indicator light being on.

Wastewater and Blockage Issues

Troubleshooting problems with the wastewater hose, siphon connection, or loose pump cover.

Tableware Cleaning Performance

Addressing common cleaning issues such as food remnants, streaks on glassware, and rust spots on cutlery.

Programme Interruption and Fault Lights

Resolving issues where all LEDs light up or flash, or the programme does not continue running.