Need help?Do you have a question about the Siemens PM240-2 and is the answer not in the manual?
General| Input Voltage | 380 ... 480 V 3 AC |
|---|---|
| Efficiency | Up to 98% |
| Protection Class | IP20 |
| Communication Interfaces | PROFIBUS, PROFINET, USS, Modbus RTU |
| Storage Temperature Range | -25 ... 70 °C |
| Relative Humidity | 5 ... 95 % (no condensation) |
| Shock Resistance | 15 m/s² (1.5 g) for 11ms |
| Frame Size | FS A to FS F |
| Operating Temperature Range | -10 ... 50 °C (without derating), -10 ... 60 °C (with derating) |
Critical safety information for operating electrical devices and preventing hazards.
Identifies residual risks associated with power drive systems during operation.
Explains implementation of "Safe Torque Off" safety function via Power Module terminals.
Conditions for reliable operation, including cabinet installation and pollution degree.
Instructions for correctly installing Power Modules in a control cabinet.
Safety instructions for connecting inverters, including DC link capacitor discharge.
Arrangement of line and motor terminals and EMC-compliant installation.
Guidelines for dimensioning protective conductors based on leakage current.
Details on connection types, cable cross-sections, and torques.
Rules and guidelines for ensuring EMC compliance during installation.
General maintenance procedures for the Power Module, including cleaning and fan replacement.
Step-by-step guide for replacing fan modules in Power Modules.
Explains EMC behavior, environments, and categories.
To Next Page