Siemens DESIGO PXC001.D User Manual

s
9
223
DESIGO™ PX
System controllers
PXC001.D
PXC001
-E.D
PXA40-RS...
for the integration of third-party devices and systems in Desigo
• Integration platforms and system controllers for third-party devices and
systems via KNX, Modbus, M-Bus and other protocols into the automation
level via BACnet
• System controllers for the integration of Desigo RXB/RXL room controllers
• Native BACnet devices with communication via BACnet/LonTalk or
BACnet/IP
• BTL label (BACnet communications passed the BTL test)
• Comprehensive management and system functions (alarm management,
time scheduling, trends, remote management, access protection etc.)
• Supports operation via local or network-compatible operator units PXM…
CM1N9223en_01
2014-04-04
Building Technologies

Siemens DESIGO PXC001.D Specifications

General

Product Type	Building Automation Controller
Power Supply	24 VAC/DC
Power Consumption	5 VA
Protection Class	IP20
Mounting	DIN Rail
Communication Protocol	BACnet
Digital Inputs	8
Analog Inputs	4
Operating Temperature	-5 to 50 °C
Humidity Range	5 to 95% RH (non-condensing)
Storage Temperature	-25 to 70 °C

Summary

DESIGO™ PX System Controllers

Product Usage and Functionality

Product Use and Integration

Product Functions

Outlines the comprehensive management and system functions available, including alarm management and scheduling.

System Controller and Option Module Types

Summarizes the different types of system controllers and option modules available for configuration.

Product Ordering and Design

Product Ordering Information

Lists product numbers, stock numbers, and designations for system controllers and option modules.

Operational Information

LED Indicator Status

Explains the meaning of various LED indicators for communication and device status.

Installation and Maintenance

Mounting and Installation

Provides instructions for mounting devices on standardized rails and connecting interfaces.

Commissioning Procedures

Covers essential steps for commissioning, including program loading, configuration, and network connection.

Battery Life and Performance

Details on the lifespan of CR2032 and FR6/AA batteries for clock and data backup.

Replacing the Battery

Procedure for replacing the system controller's batteries, including precautions.

Firmware Upgrades

Technical Data

General Device Specifications

Operating Data and Storage

Communication Interfaces

Specifications for Building Level Network, Local Communication, KNX, RS232, and RS485.

RS485 Interface Details

Standards, Directives, and Approvals

Pin Assignments

Supply Plug Pinout

LONWORKS Plug Pinout

Ethernet Plug Pinout

HMI Plug Pinout

HMI/Tool Plug Pinout

Tool Plug (KNX) Pinout

RS232 Serial Plug Pinout

RS485 Plug Pinout

KNX Plug Pinout