Desigo™
Automation stations
PXC4.E16
For the control of primary plants
● Compact automation station for HVAC and building control systems,
freely programmable using graphical programming interface
● BACnet/IP communication (BTL certified)
● BACnet Secure Connect communication
● 2-port Ethernet switch for low-cost cabling
● 16 inputs/outputs: 12 universal inputs/outputs, 4 relay outputs
Extendable via I/O modules TXM…
● KNX PL-Link bus to connect sensors and operator units (including bus power)
● Integration of Modbus data points via RTU and / or TCP
● WLAN interface for engineering and commissioning
● Operating voltage AC24V
● Mounted on standard rails or on the wall
● Plug-in screw terminal blocks
A6V11646018_en--_k Smart Infrastructure
2023-02-27
To Next Page
Need help?
General
