Siemens Desigo DXR1.E02PLZ-112 User Manual

A6V11393935_en--_c
Smart Infrastructure
2020-09-01
Desigo™ Room Automation
Compact actuating room automation station, BACnet/IP, AC 24
V (Actuating DXR)
DXR1.E02PLZ-112
Combination of room automation station and actuator for buildings with increasing
demand on functionality and flexibility in Room Automation, VAV applications.
● Combination of compact room automation station and actuator for VAV control
● No room unit can be connected
● BACnet IP communications (BTL certified)
● 2-port Ethernet switch
● USB interface
● Operating voltage AC 24 V
● Built-in 10 Nm actuator
● Internal 0…500 Pa differential pressure sensor
● Plug-in terminal blocks

Siemens Desigo DXR1.E02PLZ-112 Specifications

General

Brand	Siemens
Model	Desigo DXR1.E02PLZ-112
Category	Controller
Language	English

Summary

Features

Compact Series

Plug-in Terminal Blocks

Integrated Actuator

The actuator gear base is integrated into the housing of the actuating DXR, supporting dampers up to 10 Nm.

Use

Pre-installed Application Types

Variable (VAV) and constant air volume flow control are supported.

Functions

Communication

2-port Ethernet switch for cost-effective cabling via line topology.

LED Indication

Security and Safety

Security Precautions

National safety regulations and precautions for handling the device.

Engineering and Wiring

Mounting Instructions

Instructions for mounting the automation station directly on a damper shaft.

Technical Data

Power Data

Functional Data

Specifications for nominal torque, rotary angle, and shaft size.

Pressure Sensor Specifications

Measurement range, sample rate, accuracy, and resolution of the pressure sensor.

Connections and Interfaces