Siemens DESIGO PX Series User Manual

s
9
223
DESIGO™ PX
System controllers
PXC001.D
PXC001
-E.D
PXA40-RS...
for the integration of third-party devices and systems in Desigo
• Integration platforms and system controllers for third-party devices and
systems via KNX, Modbus, M-Bus and other protocols into the automation
level via BACnet
• System controllers for the integration of Desigo RXB/RXL room controllers
• Native BACnet devices with communication via BACnet/LonTalk or
BACnet/IP
• BTL label (BACnet communications passed the BTL test)
• Comprehensive management and system functions (alarm management,
time scheduling, trends, remote management, access protection etc.)
• Supports operation via local or network-compatible operator units PXM…
CM1N9223en_01
2014-04-04
Building Technologies

Siemens DESIGO PX Series Specifications

General

Operating Voltage	24 V AC / DC
Protection Class	IP20
Mounting	DIN rail mounting
Communication	BACnet, Modbus, KNX
Memory	Flash
Certifications	CE, UL

Summary

System Controllers Overview

Use Cases and Functions

Explains application scope, integration, and core functionalities of system controllers.

Product Information

Ordering Information

Lists product numbers, stock numbers, and designations for controllers and option modules.

Mechanical Design

Details physical construction, mounting, and component layout of the system controllers.

Operation and Installation

Mounting

Provides instructions for mounting system controllers onto standardized rails.

Commissioning

Guides through setting up, configuring, and identifying system controllers.

Loading Programs and Configuration

Details downloading operating programs and setting parameters via XWP and operator units.

Network Connection and Testing

Covers network address configuration, unique identification, and wiring tests.

Firmware Management

Explains procedures for force firmware download and system restart operations.

Maintenance and Disposal

Battery Management

Covers battery life, replacement procedures, and caution notes for system controllers.

Firmware Updates

Details how to update the firmware and operating system of the system controllers.

Disposal Procedures

Provides guidelines for compliant disposal of electronic waste and lithium batteries.

Technical Specifications

General and Operating Data

Covers device parameters, processor, storage, and data backup specifications.

Communication Interfaces

Details LonWorks, Ethernet, HMI, KNX, RS232, and RS485 communication interfaces.

Environmental and Compliance Standards

Outlines protection standards, ambient conditions, directives, and product approvals.

Pin Assignments

Power and LONWORKS Connections

Details pin assignments for supply plug and LONWORKS interface connections.

Network and Serial Connections

Covers pinouts for Ethernet, HMI, KNX Tool, RS232, RS485, and KNX plugs.

Physical Dimensions