Do you have a question about the Siemens TUTORbit POL687 and is the answer not in the manual?
Brand | Siemens |
---|---|
Model | TUTORbit POL687 |
Category | Controller |
Language | English |
Appliance installation must comply with national and local regulations.
Deactivate appliance and contact qualified technician for repairs.
Definition of a qualified technician for heating and electrical systems.
Drawings are indicative; safety devices and duct diameters require verification.
Overview of the TutorBit system and its components.
Explains warning symbols like Attention, Generic Danger, and Important Instruction.
Guidelines for proper disposal of electrical and electronic equipment.
Provides dimensional drawings for the POL687 controller and POL895 remote control.
Details electrical connections for the TutorBit controller and its capabilities.
Details electrical connections and configuration for expansion modules.
Information on connecting, using the QMX3 sensor, and TutorBit's capabilities.
Parameters for configuring system setup, modules, sensors, and various operating modes.
How to manage heating, cooling, DHW, heat pumps, and related functions.
Steps to connect and configure a heat pump, and its operation modes.
Introduction to various hydraulic and electrical diagrams for system configurations.
Protocols for connecting TutorBit to home automation systems (Modbus, KNX, BACNET).
How to query and view alarms displayed on the TutorBit.
Meaning of BSP and BUS light states on the Tutorbit and expansion modules.
Handling anti-legionella alarms, degraded operation, and saving/restoring configuration.
Description of the home screen, general info, and appliance navigation.
How to access profiles and navigate menus for parameter editing.
How to adjust DHW, heating, and cooling parameters and modes.
How to set time programs for DHW, DHW return, heating, and cooling circuits.
How to use, set temperatures, and program time for QMX3 room sensors.
Overview of TutorBit menus, parameters, and customization options.