To Next PageTo Next Page
Need help?Do you have a question about the Siemens S7-1200 TELECONTROL and is the answer not in the manual?
General| Programming | TIA Portal |
|---|---|
| Interfaces | Ethernet, RS485 |
| I/O Modules | Expandable with signal modules |
| Power Supply | 24 V DC |
| Product type designation | S7-1200 TELECONTROL |
| Real-time clock | Yes |
| Protection Class | IP20 |
| Communication | PROFINET |
| Digital outputs | Up to 10 |
| Analog outputs | 2 integrated, expandable |
| Communication protocols | PROFINET, Modbus TCP, Telecontrol |
| Operating temperature | -20 to +60 °C |
| Digital inputs | Up to 14 |
| Analog inputs | Integrated in CPU or via I/O modules, depending on the specific model |
Warnings and requirements for operating the device in hazardous environments according to ATEX/IECEx and UL HazLoc standards.
Procedures for installing the CP, inserting the SIM card, and initial commissioning steps.
Guidelines for securing the system, including network security, physical access, and password management.
Steps for configuring the CP module and communication settings using the SIMATIC STEP 7 software.
