To Next PageTo Next Page
Need help?Do you have a question about the Siemens S7-1200 and is the answer not in the manual?
General| Digital Inputs | Integrated in CPU or via signal modules (SM) |
|---|---|
| Digital Outputs | Integrated in CPU or via signal modules (SM) |
| Analog Inputs | Integrated in CPU or via signal modules (SM) |
| Analog Outputs | Integrated in CPU or via signal modules (SM) |
| Communication | PROFINET |
| Communication Ports | 1 x PROFINET |
| I/O Modules | Signal Modules (SM) |
| Programming | STEP 7 |
| Power Supply | 24V DC |
| Operating Temperature | 0°C to 55°C |
| Expansion Modules | Communication Modules (CM), Battery Modules (BM) |
Connects S7-1200 controller to mobile wireless networks (LTE, UMTS, GSM).
Details telecontrol and direct communication via mobile networks.
Lists hardware, software, and contract requirements for using the CP.
General safety and operational notices, including overvoltage protection.
Step-by-step guide for installing the CP and initial commissioning.
Overview of configuring the CP using SIMATIC STEP 7 software.
Details necessary information for configuring the CP and telecontrol system.
How to configure data points and messages for CPU communication.
Describes image memory, send buffer, data transmission types, and event triggers.
Overview of security features like VPN, firewall, and secure protocols.
Configuration of specific functions through STEP 7 parameter groups.
Overview of diagnostic tools including LEDs, STEP 7, and Web server.
