Need help?Do you have a question about the Siemens SIMATIC S7-300 Series and is the answer not in the manual?
General| Programming Languages | LAD, FBD, STL, SCL, GRAPH |
|---|---|
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -40°C to 70°C |
| Protection Class | IP20 |
| Processor | Depends on CPU model (e.g., CPU 315-2 DP has 16-bit processor) |
| Memory | Depends on CPU model (e.g., CPU 315-2 DP has 256 KB work memory) |
| Communication Interfaces | MPI, PROFIBUS DP, Ethernet (depending on model) |
| Power Supply | 24 V DC or 120/230 V AC (depends on power supply module) |
| Digital Inputs | Depends on module (e.g., 8, 16, 32 channels) |
| Digital Outputs | Depends on module (e.g., 8, 16, 32 channels) |
| Analog Inputs | Depends on module (e.g., 8, 16 channels) |
| Analog Outputs | Depends on module (e.g., 2, 4) |
| Relative Humidity | 5% to 95% non-condensing |
| Mounting | DIN rail |
Overview of CPU control and display elements, including differences between models.
Details on the communication capabilities and protocols supported by the CPUs.
Comprehensive technical data and specifications for various CPU models.
Information on DP address areas and configuration for PROFIBUS-DP.
Configuration and operational aspects of the CPU when used as a DP Master.
Methods for diagnosing issues when the CPU functions as a DP Master.
Configuration and operational aspects of the CPU when used as a DP Slave.
Methods for diagnosing issues when the CPU functions as a DP Slave.
Definition and component parts of the CPU cycle time.
Definition, factors affecting response time, and range of fluctuation.
Highlights functional differences between specific CPU models.
Guidelines for emitted interference and immunity for industrial use.
Dimensioned drawing of the CPU 312 IFM, including front view details.
Dimensioned drawings for CPUs 313, 314, 315, 315-2 DP, 316-2 DP.
Dimensioned drawing of the CPU 318-2, including front and side views.
To Next Page