To Next PageTo Next Page
Need help?Do you have a question about the Siemens S7-1500 and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| CPU | Various models available (e.g., 1511-1 PN, 1513-1 PN, 1515-2 PN, 1516-3 PN/DP, 1517-3 PN/DP, 1518-4 PN/DP) |
| Communication Interfaces | PROFINET, PROFIBUS, OPC UA |
| Programming Languages | LAD, FBD, SCL, STL, GRAPH |
| I/O Modules | Digital I/O, Analog I/O, Technology modules, Communication modules |
| Supply Voltage | 24 V DC |
| Mounting Type | DIN rail |
| Safety | Integrated safety functions (depending on model), supports fail-safe applications |
| Redundancy | Supported (with specific models and configurations) |
| Operating Temperature | 0 °C to 60 °C (horizontal mounting), 0 °C to 50 °C (vertical mounting) |
| Memory | Depends on model (e.g., 150 KB to 20 MB work memory, up to 32 GB load memory with memory card) |
Explains the manual's focus on wiring I/O modules with SIMATIC TOP connect system cabling.
States general automation knowledge is needed to understand the documentation.
Defines the applicability to SIMATIC products in the S7-1500 product family with ET 200MP.
Mentions observing marked notes and specific attention points.
Advises on environmentally friendly recycling and disposal of products.
Lists resources for technical support and documentation.
Warns about dangerous voltages and potential severe injury or material damage.
States only qualified personnel should work on the device.
Emphasizes using products as intended and following documentation.
Describes the modular structure of SIMATIC product documentation.
Lists relevant manuals and their key content for system cabling.
Explains SIMATIC TOP connect and its connection types (fully modular, flexible).
Provides an overview of components for fully modular and flexible connections.
Lists I/O modules connectable with SIMATIC TOP connect for fully modular connection.
Outlines important rules and regulations for connecting SIMATIC TOP connect.
Details wiring rules for connecting I/O modules, supply voltage, and terminal modules.
Explains procedures for connecting front connector modules and terminal modules.
Describes connecting cables to terminal module terminals.
Explains how to identify terminal modules using labels.
Lists and guides selection of components for 16-pin and 50-pin connecting cables.
Provides information on connecting digital I/O modules, including potential bridges.
Details connecting the 2 A output module and its specific requirements.
Explains how to connect analog terminal modules to analog I/O modules.
Describes options for grounding signal cable shields at the terminal or front connector module.
Lists standards and test values satisfied by terminal modules and components.
Explains EMC and its relevance to the SIMATIC TOP connect system.
Specifies conditions for shipping and storing modules.
Details operating conditions and environmental requirements.
Provides technical data for various front connector modules.
Lists technical specifications for connecting cables.
Details technical specifications for various terminal modules.
Provides information on product and packaging disposal according to RoHS Directive.
Presents dimension drawings for various front connector modules.
Shows dimension drawings for terminal modules used with 16-pin cables.
Displays dimension drawings for terminal modules used with 50-pin cables.
Illustrates wiring diagrams for various front connector modules.
Provides wiring diagrams for terminal modules with 16-pin cables.
Shows wiring diagrams for terminal modules with 50-pin cables.
Lists available accessories and their order numbers.
Directs users to the Industry Mall for online catalog and ordering.
Provides information on accessing online support resources.
Lists contact options for technical support.
Directs users to the internet for technical documentation.
Provides a link to find news about SIMATIC TOP connect.
Advises on finding local contacts for sales, service, and support.
