Technical data
7.7 Electromagnetic compatibility of the inverter
Power Module PM240-2
98 Hardware Installation Manual, 12/2015, A5E33294624B AD
EMC limit values in South Korea
Is applicable for filtered 400 V inverters, frame sizes FSD ... FSF.
All other inverters do not comply with the limit values.
The EMC limit values to be complied with for South Korea correspond to the limit values of
the EMC product standard for variable-speed electric drives EN 61800-3, Category C2 or
limit value class A, Group 1 according to EN55011. By applying suitable supplementary
measures, the limit values according to Category C2 or according to limit value class A,
Group 1 are maintained. Further, additional measures may be required, for instance, using
an additional radio interference suppression filter (EMC filter). The measures for EMC-
compliant design of the system are described in detail in this manual respectively in the
Installation Guideline EMC.
Please note that the final statement on compliance with the standard is given by the
respective label attached to the individual unit.
You can find the Configuration Manual "EMC installation guidelines" under
(http://support.automation.siemens.com/WW/view/en/60612658)
To Next Page
Loading...
