1.3.2 Field service operation and warranty issues
Siemens can provide competent, well-trained field service representatives to provide technical
guidance and advisory assistance for the installation, overhaul, repair and maintenance of Siemens
equipment, processes and systems. Contact:
1.4 Designated usage
The Remote Control unit is used to connect the Fusesaver pole mounted circuit breaker or CMR
Compact Modular Recloser into a utility SCADA system. Any other use is forbidden, unless the
consent of Siemens has been obtained.
Changes to any part of the Remote Control Unit or its
accessories, that are carried out by the user or others, and not
previously agreed by Siemens, will void the warranty of the
whole product.
1.5 Compatibility
This version of the Remote Control Unit Operating Instructions is compatible with the following
firmware and software versions:
1.6 Additional instructions
In addition to this manual, a Protocol Manual detailing the configuration options for each
communications protocol is available. The utility may also be supplied with an RCU Manual
Supplement which details the type of radio fitted, the radio cable and SCADA system protocol details
which are specifically engineered for that utility (additional fees may be charged for this configuration
service). Finally, if the RCU is fitted with an Operator Control Panel (order codes vary by the targeted
switchgear) the user will be supplied with a manual detailing the function and maintenance of the
panel.
To Next Page
Loading...
Need help?
General
