To Next PageTo Next Page
Need help?Do you have a question about the Siemens NCU 730.3 PN and is the answer not in the manual?
General| Type | NCU 730.3 PN |
|---|---|
| Category | Control Unit |
| Communication | PROFINET |
| Number of Axes | Up to 6 |
| Input Voltage | 24 V DC |
| Product type | Numerical Control Unit |
| Protection Class | IP20 |
| Operating Temperature | 0°C to 55°C |
| Interface | Ethernet |
| Memory | 512 MB |
Detailed safety warnings and essential precautions to prevent injury or damage.
Precautions for handling electrostatically sensitive devices to prevent damage.
Description of system components and typical topology.
Requirements for grounding and interference suppression.
Critical safety precautions to be observed during assembly.
Procedure for mounting the Control Unit with spacers.
Procedure for directly mounting the Control Unit without spacers.
Instructions for mounting with external cooling via cooling ribs.
Essential safety warnings and notes for wiring the control unit.
Details on connecting the external 24 V DC power supply.
Overview of DRIVE-CLiQ components and their application.
