2 Shipment and Storage
2.1 Packaging
Each Remote Control Unit is packaged in its own cardboard box. Each box is labelled with a list of
the contents of the box and the serial number of the Remote Control unit.
The cardboard box holds:
Remote Control Unit
Pole Mounting Bracket
Battery
Radio and/or Antenna (if purchased from Siemens)
Power Supply Isolation unit (if purchased from Siemens)
RCU cubicle heater (if purchased from Siemens)
To open the box use a box cutter to cut through the sealing tape and then fold open the top flap to
access the contents. All items in the box can then be easily removed.
Other items as follows are packed separately (optional):
Solar Panel Kit
VT Kit
2.2 Marking
The packaging has symbols which give instructions for safe transport and proper storage. For the
dispatch of non-hazardous goods, the following symbols apply. These symbols must be strictly
observed.
1 2 3
Fig. 1 Symbols for the dispatch of packages
1 This way up
2 Fragile
3 Keep dry
2.3 Receipt and handling of shipment
Weight of package exceeds 15kg, handle with caution.