To Next PageTo Next Page
Need help?Do you have a question about the Siemens CP 343-1 and is the answer not in the manual?
General| Product Type Designation | CP 343-1 |
|---|---|
| Power Supply | 24 V DC |
| Protection Class | IP20 |
| Product Type | Communications processor |
| Interface | Ethernet |
| Data Transmission Rate | 10/100 Mbit/s |
| Protocols Supported | TCP/IP, UDP |
| Number of Ports | 1 |
| Operating Temperature | 0 to 60 °C |
Describes the intended use of the CP 343-1 in SIMATIC S7 and SINUMERIK systems.
Explains PROFINET IO, S7 communication, and open communication services.
Describes characteristics, limits, and data lengths for S7 communication.
Details characteristic data and limits for PROFINET IO modes.
Information on required STEP 7 versions and support packages.
Critical safety warnings and precautions for device installation and operation.
Procedures for installing the CP, connecting power, and grounding.
Steps for connecting the CP to the Industrial Ethernet network.
Guidelines to prevent unauthorized access and secure the system.
Information on setting up the CP in the STEP 7 project environment.
Configuration of network parameters like transmission medium and duplex.
