To Next PageTo Next Page
Need help?Do you have a question about the Siemens CP 1243-7 LTE and is the answer not in the manual?
General| Communication | LTE, Ethernet |
|---|---|
| Power supply | 24 V DC |
| LTE bands | B1, B3, B5, B7, B8, B20, B28 |
| Degree of protection | IP20 |
| Power Consumption | 2.4 W |
| Weight | 0.5 kg |
| Ethernet Ports | 1 |
| SIM Card Slot | 1 |
| Protection Class | IP20 |
| Interfaces | Ethernet |
| Operating temperature | -20 to +60 °C |
| Current consumption, typ. | 100 mA |
| Protocols | TCP/IP |
| SIM card | Micro-SIM |
| Antenna connection | SMA |
| Digital inputs | 2 |
Describes the product versions and validity period for this manual's content.
Details connecting the S7-1200 controller to mobile wireless networks.
Explains the communication services supported by the CP.
Details the security functions of the telecontrol protocol and industrial Ethernet.
Outlines the hardware, software, and network requirements for operating the CP.
Provides practical examples of CP configuration scenarios.
Explains the function and status indication of the module's LEDs.
Describes the power supply and wireless interface connectors.
Provides safety notices, overvoltage protection, and hazardous area usage guidelines.
Details the procedure for installing the CP and inserting the SIM card.
Provides general and physical security recommendations for the system.
Explains how to configure the CP and its communication using STEP 7.
Lists necessary information for configuring the CP and telecontrol system.
Details settings for CP phone number, PIN, data services, and APN.
Configures cyclic access to the CPU, watchdog, CP time, and diagnostics.
Covers parameter groups for CP identification, time sync, firewall, and VPN.
Explains configuring data points, messages, and their transmission.
Lists and describes program blocks for Open User Communication (OUC).
Details programming SMS messages using Open User Communication.
Explains the TC_CONFIG block for dynamic CP configuration.
Covers module LEDs, TeleService, STEP 7 diagnostics, and Web server diagnostics.
Describes methods for updating the CP firmware via STEP 7 or Web server.
Explains TeleService configuration, connection establishment, and problem handling.
Lists general technical data including article numbers and electrical properties.
Details wireless interface specifications for the LTE-EU version.
Details wireless interface specifications for the LTE-US version.
Shows the pin configuration for the 24 VDC external power supply socket.
Lists EU directives and harmonized standards met by the CP.
Details IECEx requirements and classification for explosion protection.
Details ATEX requirements and approval for potentially explosive atmospheres.
Describes the omnidirectional antenna (ANT794-4MR) for mobile wireless networks.
Explains the TS Gateway application for TeleService connections.
