Siemens CP 1243-7 LTE - Security

Configuration
4.11 Security
CP 1243-7 LTE
Operating Instructions, 04/2017, C79000-G8976-C381-03
65
●
TeleService status
The PLC tag (BOOL) indicates whether a TeleService session is active.
– 0 = No TeleService session active
– 1 = TeleService session active
●
VPN status
The PLC tag (BOOL) indicates whether a VPN tunnel is established:
– 0 = No VPN tunnel established
– 1 = VPN tunnel established
4.11
Security
Note the range and application of the security functions of the CP, refer to the section
Security functions (Page 16).
Parameter groups
If security functions are enabled, you will find the following parameter groups here:
●
CP identification
Here, you configure parameters for authenticating the CP with the telecontrol server.
You will find details below.
●
Time-of-day synchronization
For the configuration of the time-of-day synchronization read the section Time-of-day
synchronization (Page 47).
●
Authorized phone numbers
You will find details below.
●
E-mail configuration
You will find details below.
●
Certificate manager
You will find details below.
●
Firewall
You will find details below.
●
Log settings
Here you make the settings for logging events relevant for security.
You will find details below.
●
VPN
Here you configure the VPN communication.
You will find details below.