Need help?Do you have a question about the Siemens CPU 410E and is the answer not in the manual?
General| Product type designation | CPU 410E |
|---|---|
| Power Supply | 24 V DC |
| Number of DP masters | 1 |
| Supply voltage | 24 V DC |
| Architecture | SIMATIC S7-400 |
| Number of PROFINET IO devices | 0 |
| Digital Inputs | 0 |
| Digital Outputs | 0 |
| Analog Inputs | 0 |
| Analog Outputs | 0 |
| Operating Temperature | 0 to 60 °C |
Explains the function and requirements of synchronization modules in an H-system.
Describes system reaction to link performance issues and diagnostic data.
Explains error IDs and procedures for handling synchronization component failures.
Outlines safety precautions for device installation, including hazardous areas.
Details criteria and specifications for choosing appropriate fiber-optic cables.
Details the step-by-step procedure for wiring and physically installing the modules.
Covers installation requirements for fiber-optic cables, including bending radii.
Highlights crucial points for installing fiber-optic cables for the synchronization link.
Lists safety notices for connecting the device, especially in hazardous areas.
Presents detailed technical specifications for different synchronization modules.
Outlines compliance with the ATEX directive for explosion protection.
Details compliance with IECEx standards for explosion protection.
To Next Page