Need help?Do you have a question about the Siemens LOGO! CMK2000 and is the answer not in the manual?
General| Product Type | Communication Module |
|---|---|
| Product type designation | LOGO! CMK2000 |
| Brand | Siemens |
| Model | CMK2000 |
| Input Voltage | 24 V DC |
| Rated value (DC) | 24 V |
| Communication Interface | Ethernet |
| Programming Software | LOGO! Soft Comfort |
| Protection Class | IP20 |
| Operating Temperature | -20 to +55 °C |
| Storage Temperature | -40 to +70 °C |
| Height | 90 mm |
| Depth | 58 mm |
| Ambient temperature during operation | -20 to +55 °C |
| Relative Humidity | 95% at 25°C (non-condensing) |
Provides an overview of the documentation's purpose, target groups, and required knowledge.
Details general safety warnings, caution notices, and information on repairs and user-serviceable parts.
Outlines IT security guidelines and protective measures for the CMK2000.
Describes the CMK2000's integration into the KNX system and its capabilities.
Highlights the benefits and functionalities of the CMK2000 when used with LOGO!.
Illustrates a basic system setup and explains the roles of key components.
Lists the necessary hardware and software components for operating the CMK2000.
Covers essential standards and safety precautions for mounting and connecting the CMK2000.
Details site selection, mounting positions, and environmental conditions for the device.
Specifies requirements for transporting the CMK2000 device safely and without damage.
Outlines the conditions for storing the CMK2000 device properly to maintain its integrity.
Lists the items included with the CMK2000 device upon purchase.
Provides instructions for mounting the CMK2000 on a standard mounting rail or control panel.
Details essential safety warnings for connecting the device, focusing on electrical hazards.
Explains how to connect the 24 V DC power supply to the CMK2000.
Describes how to connect the functional ground for EMC compliance and surge protection.
Details the Ethernet connection between the LOGO! 8 and the CMK2000 module.
Explains the procedure for connecting the CMK2000 to the KNX bus terminal.
Lists the necessary PC and LOGO! software for creating user functions.
Provides a step-by-step guide for configuring LOGO! for communication with the CMK2000.
Explains modifications needed for existing LOGO! 0BA7 projects when using the CMK2000.
Specifies the PC, ETS software, and KNX interface needed for configuration.
Outlines the process for configuring the CMK2000 using the ETS software.
Details how to assign a unique physical address to the CMK2000 using the ETS.
Covers essential settings like IP addresses, update rates, and passwords for the CMK2000.
Explains how to configure data exchange parameters between KNX and LOGO!.
Details how to map LOGO! data types and values to KNX data points.
Explains how to map KNX data types and values to LOGO! variable memory or flags.
Describes how to perform diagnostics and firmware updates using the web interface.
Provides instructions for cleaning the CMK2000 device to ensure proper operation.
Offers guidance on the environmentally compliant recycling and disposal of the device.
Presents the physical dimensions of the CMK2000 module.
Lists detailed technical specifications, including firmware, installation, and electrical data.
Details the CE marking and compliance with EMC directives for the CMK2000.
Provides contact information for technical support, online resources, and ordering systems.
To Next Page
