System overview
3.2 Features
CMK2000
16 Operating Instructions, 11/2015, A5E34877550B/001
● CMK2000 together with LOGO! allows the use of inexpensive actuators and sensors in
the KNX environment
● KNX devices can access the signal states of all inputs and outputs of the LOGO! 8.
● Standard LOGO! functions can be used, e.g.: logic functions, ON/OFF delays.
● Various KNX data point types can be made available by CMK2000 and LOGO!.
● Various LOGO! variable types can be sent to KNX devices, e.g. LOGO! analog values as
settings for KNX devices as float values.
● Time synchronization between KNX and LOGO! is possible.
● No inputs or outputs are occupied in the process image of the LOGO! 8 for the KNX
communication (saving is possible in the variable memory).
Note
Not more than one CMK2000 KNX device may be connected to a LOGO!.
To Next Page
Loading...
