Application planning
4.3 Transportation
CMK2000
Operating Instructions, 11/2015, A5E34877550B/001
27
The devices must be transported in a clean and dry state, preferably in their original
packaging. The transport temperature must be between - 40 °C and + 70 °C. Temperature
fluctuations greater than 20 K per hour are not permitted.
The devices must be stored in clean and dry rooms, preferably in their original packaging.
The storage temperature must be between -40 °C and +70 °C.
● CMK2000 device
● Insert
● Bus connector
Unpacking and checking the delivery
1. Unpack the device.
2. Check the delivery for completeness.
3. Check the device for transport damage by visual inspection.
Damaged parts can result in damage to the system. Do not use devices that show evidence
of damage!
To Next Page
Loading...
