Siemens LOGO! CMK2000 - Introduction; Preface

CMK2000
Operating Instructions, 11/2015, A5E34877550B/001
9
Introduction
1
1.1
Preface
Purpose of this documentation
These operating instructions contain all the information required for configuring, installing,
commissioning and operating the CMK2000.
These operating instructions are intended for qualified personnel in the following target
groups:
● Commissioning engineers
● Operating and service personnel
● Network administrator (optional)
● KNX integrator
Basic knowledge required
The following knowledge is required in order to understand the operating instructions:
● Knowledge in application of the KNX bus system for building automation
● Knowledge of the Siemens LOGO! 8 logic module
● General knowledge in the field of automation technology
● General knowledge of network engineering
Validity of the documentation
This documentation describes the current delivery condition of the CMK2000.
These instructions describe the device based on the data valid at the time of release.
Trademarks
LOGO!
®
is a registered trademark of Siemens AG.
History
Edition
Remarks
11/2015 First edition