Siemens LOGO! CMK2000 - LOGO! Data Types, Inputs and Outputs

Configuring and commissioning using ETS
8.5 Parameter assignments for the KNX channels
CMK2000
Operating Instructions, 11/2015, A5E34877550B/001
45
8.5.3
LOGO! data types, inputs and outputs
Overview
The CMK2000 exchanges data with LOGO! via a network connection and thereby directly
accesses the variable memory.
Inputs/outputs and flags of the LOGO!
For all physical inputs and outputs of the LOGO! (I, Q, AI, AQ), as well as for all analog and
digital flags, you can specify the number of the object (e.g. M64) from which the values are
to be read or to which they are to be written.
Note
Inputs
and outputs of the LOGO! cannot be written from the KNX bus.
Value ranges
Digital input I
1…24
Analog input AI
1…8
Digital output Q
1…20
Analog output AQ 1…8
Digital flag M
1…64
Analog flag AM
1…64