To Next Page

To Previous Page

KMS-0021

2022-02-10

5 Installation

This section provides information about the installation and commissioning with regard to the

following:

 Required documents

 Personnel requirements

 Tools, devices, and expendable materials to be used

 Accident prevention

 Recording and documentation.

5.1 Safety instructions for installation

DANGER

Electrical Hazard – danger to life!

Touching live parts is fatal or causes serious physical injury.

CAUTION

It is the user’s responsibility to ensure all installation

procedures developed comply with all applicable safe work

practices.

Attend the local network rules.

CAUTION

To prevent damage to the RCU operators should always wear

ESD earth straps whilst operating the equipment if in a high

static environment.

Note

The RCU requires earthing in accordance with the user’s

normal procedures.

5.2 Installation guidelines

The RCU installation occurs at the bottom of the pole and is not connected to high voltage. Subject

to local utility regulations installation can be completed by personnel with suitable low voltage

qualifications.

Earthing of the RCU is required in accordance with the user’s standard procedures.

5.2.1 Tools required for installing the RCU

 1 x 24 mm A/F spanner

 2 x 18 mm A/F spanner

Siemens 3AD8 User Manual

Other manuals for Siemens 3AD8