Transport, storage and packing
9229 9862 176 0D 11
2013-08-28
• Unscrew all the screws from the side walls.
• Take the supports out of the transport unit.
• Remove the side walls.
• Remove the accessories and check for damage.
• Remove film.
• Check the vacuum circuit-breaker 3AH4 for damage.
• Undo tensioning belts, if applicable.
Fig. 12 Removing the supports Fig. 13 Removing the side walls
Fig. 14 Removing the accessories Fig. 15 Removing the film
To Next Page
Loading...
