599 Series 2-Way Ball Valves Technical Instructions
Document Number 155-703P25
February 4, 2016
Page 3 Siemens Industry, Inc.
Actuator Prefix Code OpenAir Actuator * Control
172P GMA126.1P 2-position, fail-safe, normally closed, dual auxiliary switches
173A GDE131.1Q** Floating, fail-in-place
173B GLB131.1Q** Floating, fail-in-place
173C GDE161.1Q** 0 to 10 Vdc, fail-in-place
173D GLB161.1Q** 0 to 10 Vdc, fail-in-place
*When ordered as an assembly, the actuator is provided with 3-foot (.9 m) wires.
**When ordered as an assembly, the actuator is provided with conduit adapter and 6-foot (1.8 m) wires.
See TB253 599 Series Ball Valve and Actuator Assemblies Selection Technical
Bulletin (155-704P25) for complete selection procedures and ordering numbers
for both two-way and three-way ball valve assemblies.
Individual two-way ball valves can be ordered using the product numbers in
through Table 6 for valves with a chrome-plated ball and brass stem or Error!
Not a valid result for table. through Table 11 for valves with stainless steel ball
and stem.
Figure 1.
To Next Page
Loading...
