To Next PageTo Next Page
Need help?Do you have a question about the Siemens 6AV2128-3MB06-0AX0 and is the answer not in the manual?
General| Supply voltage | 24 V DC |
|---|---|
| Number of Ethernet ports | 1 |
| Number of USB ports | 2 |
| Protection class IP (front) | IP65 |
| Display Resolution | 800 x 480 pixels |
| Touch Screen | Yes |
| Interface | Ethernet, USB |
| Installation type | Panel Mount |
| Operating system | Windows Embedded Compact |
| Operating Temperature | 0 to 50 °C |
| Display type | TFT LCD |
Explains the manual's warning notice system for safety and property damage.
Defines the qualifications required for operating the HMI device.
Notes on the correct application and handling of Siemens products.
Outlines the objectives and scope of these operating instructions.
Lists the prerequisites for understanding the manual.
Details which HMI devices and software are covered by the manual.
Explains the conventions used for terminology and notation.
Defines the naming conventions used throughout the document.
Provides a general description of the SIMATIC HMI Unified Comfort Panels.
Details the physical interfaces available on the HMI devices.
Lists available accessories for the HMI device.
Provides essential safety precautions for operating the HMI device.
Covers security aspects for HMI devices and data.
Specifies safety requirements for using the device in hazardous areas.
Instructions for preparing the HMI device installation.
Detailed steps for mounting the HMI device.
Guide for connecting various cables and power to the HMI device.
Describes the available methods for interacting with the HMI.
Provides critical information for using the touch screen interface.
Step-by-step guide for initial setup and operation.
How to access and open the Control Panel settings.
Configuration options related to system properties and status.
Settings for network configuration and internet connectivity.
Options for securing the HMI device and its access.
Defines how data is transferred between PC and HMI device.
Procedure for backing up HMI device data to external storage.
Enables and configures automatic backup functionality.
Management options for SIMATIC apps and add-ons.
Table showing data transmission options via interfaces.
Detailed steps for transferring a project using WinCC.
Procedures for backing up and restoring HMI device data.
Guide for updating the HMI device's operating system.
General guidelines for maintaining and servicing the HMI device.
Instructions for using maintenance mode for factory resets.
Information on obtaining spare parts and repair services.
Lists device certifications, approvals, and markings.
Details EMC compliance and interference immunity.
Comprehensive technical data for HMI devices.
Detailed pin assignments and descriptions of device interfaces.
Resources for obtaining technical support and product information.
Information on diagnosing and resolving common faults.
Explains safety symbols used on the device and in the manual.
