Siemens 6AV2128-3MB06-0AX0 - Style conventions

Preface
Unified Comfort Panels
4 Operating Instructions, 03/2020, A5E46641217-AA
NOTICE
Manual belongs to the HMI device
This manual belongs to the HMI device and is also required for recommissioning. Store all
supplied and supplementary documentation for the entire service life of the HMI device.
Provide all stored documents to subsequent owners of the HMI device.
Trademarks
The following designations marked with the symbol ® are registered trademarks of
Siemens AG:
● HMI
®
● SIMATIC
®
● WinCC
®
Style conventions
Style Convention
Scope
"Add screen"
• Terminology that appears in the user interface, for example, dialog box
names, tabs, buttons, menu commands
• Required input, for example limit values, tag values
• Path information
"File > Edit" Operational sequences, for example, menu commands, shortcut menu
commands
<F1>, <Alt+P>
Keyboard operation
Please observe notes labeled as follows:
Note
A note contains important information about the product described in the manual and its use,
or a specific section of the manual to which you should pay particular attention.