Operating the Control Panel
5.9 Service and Commissioning
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
111
Using automatic backup of a system memory card
If a system memory card already contains automatically backed-up data, the corresponding
backup must first be loaded. Automatic backup can then be continued.
1. Insert the SIMATIC SD memory card with automatically backed-up data in slot X50.
The "System memory card plugged" dialog box is displayed.
2. Press the "OK" button.
The window "Service and Commissioning" > "Restore" opens in the Control Panel.
3. Select a backup file and press the "Restore" button.
The following dialog box indicates that all data on the device will be overwritten.
To Next Page
Loading...
