LOGO! Manual
A5E00067781 01
16
Analog inputs
In the case of LOGO!24, LOGO!12/24RC and
LOGO!12/24RCo, the inputs I7 and I8 can be used as nor-
mal digital inputs or as analog inputs. How the input is used
depends on its purpose in the LOGO! control program. You
can use the digital capability of the input with I7/I8 and its
analog capability with the identifiers AI1 and AI2.
See also Section 4.1.
Note
Always use twisted wires for analog signals, and keep
them as short as possible
Installin
and Wirin
LOGO!
To Next Page
Loading...