Siemens 6ED1 053-1FB00-0BA2 User Manual

i
LOGO! Manual
A5E00067781 01
Welcome to LOGO!
Dear customer,
Thank you for purchasing LOGO!, and congratulations on your
decision. In LOGO! you have acquired a logic module that meets
the stringent quality requirements of ISO 9001.
LOGO! is universal in application. Its comprehensive functionality
and great ease of use make it a highly cost–efficient solution for
virtually any application.
LOGO! documentation
This LOGO! manual tells you how to install, program and use
LOGO!.
You can find information on wiring in the LOGO! manual as well as
in the LOGO! product information that is supplied with each de-
vice. You can get further information on programming LOGO! via
the PC in the LOGO!Soft Comfort online help system. LOGO!Soft
Comfort is the programming software for PCs. It runs under
WINDOWS

and will help you get to know LOGO! and to write,
test, print out and archive programs independently of LOGO!.
Guide to the manual
We have subdivided this manual into 9 chapters:
 Getting to Know LOGO!
 Installing and Wiring LOGO!
 Programming LOGO!
 LOGO! Functions
 Parameterizing LOGO!
 LOGO!’s Program Modules
 LOGO! Software
 Applications
 Appendices
Additional support
You can find answers to your LOGO! questions quickly and easily
on the Internet at http://www.ad.siemens.de/logo.

Siemens 6ED1 053-1FB00-0BA2 Specifications

General

Input Voltage	24 V DC
Number of Digital Inputs	8
Protection Class IP	IP20
Connection Type	Screw terminals
Product Type	Controller
Relay Outputs	0

Summary

Getting to Know LOGO!

Installing and Wiring LOGO!

General Installation and Wiring Guidelines

Provides essential guidelines for safely installing and wiring LOGO! devices, covering standards and wire usage.

LOGO! Mounting

Details the process of mounting LOGO! on a DIN rail and safely removing it using the snap catch mechanism.

Connecting Power Supply

Explains how to connect LOGO! variants to different AC/DC supply voltages according to specifications.

Programming LOGO!

LOGO! Connectors

Explains how LOGO! inputs and outputs are identified and represented, including ASi bus connections.

Blocks and Programming Logic

Key Programming Rules

Outlines four essential golden rules for efficient and correct programming of LOGO!, covering grip, I/O, cursor, and planning.

Entering and Running Programs

Details the steps to switch to programming mode, enter a first program, and switch LOGO! to RUN mode.

LOGO! Functions

Basic Functions (BF)

Special Functions Overview

Parameterizing LOGO!

Entering Parameterization Mode

Explains how to enter parameterization mode to adjust settings without changing the program.

Managing Parameters

Guides on selecting parameters via menus and changing their values using the device's interface.

Setting the System Time

LOGO! Program Modules

Module Handling

Provides instructions on safely removing and inserting program modules/cards, including warnings about handling.

Program Transfer

LOGO! Software

LOGO!Soft Comfort Capabilities

Outlines the functions of LOGO!Soft Comfort, including offline generation, simulation, and program transfer.

Software Setup and PC Connection

Lists system requirements for LOGO!Soft Comfort and guides through installation and PC connection procedures.

Technical Specifications

LOGO! 230 Variant Specifications

LOGO! 24 Variant Specifications

LOGO! 24 Long Variant Specifications

Determining the Cycle Time

Test Program for Cycle Time Measurement

LOGO! ...LB11: Active-Passive Switchover

Switching Between Active and Passive Modes